Really Right Stuff BOM1-B camera plate for OM System OM-1 and OM-1 Mark II

Perfect fit instead of universal plate: precisely for OM System OM‑1 & OM‑1 Mark II

From the very first time you mount it, you notice that the Really Right Stuff BOM1-B camera plate is not just some generic universal base plate, but truly designed specifically for this camera family. The contour follows the exact shape of your OM System OM‑1 or OM System OM‑1 MARK II, so nothing wobbles, nothing rocks, and the plate feels like an integral part of the body.

Thanks to this custom fit, access to important controls and doors is preserved, while the contact surface is large enough to anchor your camera securely on the tripod. Especially with longer focal lengths or long exposures, this precise fit pays off because vibrations are minimized and small shakes are reliably absorbed.

In short: not a makeshift solution, but a quick-release plate that is made for your OM SYSTEM camera. Because that’s exactly what it is.

ARCA-style in use: compatible with 38 mm quick-release clamps

If you’ve been photographing for a while, you know the issue: different tripod heads, various quick-release clamps, constantly searching for adapters. With the BOM1-B, things get much more relaxed. The camera plate is fully ARCA compatible and fits Arca-style compatible (according to the manufacturer) 38 mm quick-release clamps.

This means you can use the plate in practically all common Arca-style clamps, from compact travel tripods to massive studio heads. For more information on ARCA compatible systems, you can find suitable components under ARCA-compatible quick-release solutions.

This compatibility makes your OM System OM‑1 or OM‑1 MARK II significantly more versatile. You can switch smoothly between ball head, gimbal, or slider without having to change the plate each time. Once mounted, the BOM1-B simply stays on, and you focus on your subject instead of screws and adapters.

Milled aluminum, black anodized: built for everyday photography

The BOM1-B camera plate is manufactured in the USA and follows the typical Really Right Stuff approach: better to build a part that lasts for many years than to buy twice. The material is high-quality aluminum, precisely milled and then black anodized.

This black anodized surface not only protects against scratches and corrosion, it also provides a discreet, low-reflection appearance. This is especially pleasant for nature and wildlife photography, because nothing shines or reflects light unintentionally.

The combination of aluminum and clean workmanship results in a very rigid, torsion-resistant base. Even with heavy lenses, the setup remains stable. It almost feels a bit overbuilt, but in a positive sense: better too stable than undersized.

Integrated QD socket: quick coupling on the strap (with matching QD anchor)

A small detail that is extremely practical in everyday use: the BOM1-B has an integrated QD strap socket, i.e. exactly one QD strap anchor socket. This allows you to use QD compatible strap systems that can be clipped in and out with a single click.

To use this QD strap socket, you need a strap with QD strap anchors. You can find suitable solutions here: QD strap anchors and compatible straps.

The advantage is obvious: you carry your Olympus / OM SYSTEM camera comfortably on the strap, unclip it from the carrying system in seconds when needed, and place it directly into the Arca-style compatible quick-release clamp. No re-threading, no fiddling with screws. Especially on the go, when things need to move quickly, this feels like a small but very noticeable upgrade.

Laser-engraved sensor center: precise alignment for panorama & precision

Another often underestimated detail is the laser-engraved sensor center marking on the BOM1-B. This marking shows you the exact position of the sensor center of your OM System OM‑1 or OM‑1 MARK II.

Especially for panoramic photography this is almost indispensable, because you can align your camera precisely over the pivot point to create clean, low-distortion panoramas. But even for architectural shots, repro work, or precise studio setups, this clearly visible sensor center is extremely helpful.

The marking is laser-engraved, meaning permanent and abrasion-resistant. It doesn’t disappear after a few uses in the field but remains clearly visible, even when the plate is used regularly and handled a bit more roughly.

Consistently designed for the OM‑1 series: stable, secure, everyday-ready

The Really Right Stuff BOM1-B is deliberately not universal, but precisely matched to the OM System OM‑1 and OM System OM‑1 MARK II. This means: optimal contact surfaces, secure fit, no compromises in stability and operability.

The plate functions as a solid quick-release plate that reliably connects your camera to the tripod head while respecting the ergonomics of the body. You don’t have to live with wobbly adapters or undersized standard plates that twist under load. Instead, you get a solution that was designed for this camera series and proves itself in daily use.

R-Lock safety mechanism: additional security in compatible clamps

The BOM1-B uses precisely milled aluminum combined with a durable black anodized surface. This ensures a long service life and a very stable connection between camera and tripod head.

In addition, the Really Right Stuff R-Lock safety mechanism is integrated. This system provides extra security in compatible clamps and reduces the risk of the plate coming loose unintentionally. In situations where your camera is moving a lot, such as in action or sports photography, this gives a significantly better feeling.

All in all, the BOM1-B is a very matter-of-factly engineered yet thoughtfully detailed solution for photographers who use their OM System OM‑1 or OM‑1 MARK II seriously and frequently and who do not want to settle for half-baked compromises.

Product images may differ and may show accessories that are of course not included in the scope of delivery.