Wimberley RB-100 Riser Block (elevation)

Wimberley RB-100 Riser Block, precise elevation for your tripod head

Sometimes a setup is really just missing a small bit of height for everything to work smoothly. That’s exactly where the Wimberley RB-100 Riser Block comes in: a compact spacer block that raises your tripod head by about 2.5 cm, suddenly creating space where everything previously felt a bit cramped.

The RB-100 is specifically designed to raise tripod heads, especially the Wimberley Head, so that they work well with flat platforms, ground tripods, or special mounts. That may not sound spectacular, but in practice it’s often the small difference between “kind of works” and “works really well.”

Made in USA, solid build for tough everyday photography

The Wimberley RB-100 Riser Block is made in the USA and built for durability. This is not some wobbly accessory, but a precisely machined component that integrates seamlessly into a professional tripod system. The surface is finely finished, the edges are pleasantly smooth, and the thread is perfectly cut so the block can be mounted reliably and without snagging.

Especially when you’re working with heavier telephoto lenses, gimbal heads, or robust ground pods, this solid construction pays off. The RB-100 is made to be mounted, removed, transported, and occasionally handled a bit roughly on a regular basis without giving up.

Compatible with Wimberley Head, Ground Pod, Low Pod, Window Mount, and Skimmer

The RB-100 Riser Block really shows its strengths when you combine the Wimberley Head with accessories like a Ground Pod, a Low Pod, the Kirk Window Mount, or a NatureScapes.net Skimmer. In these setups the tripod head often sits very low, which is great for stability but sometimes leaves too little clearance for panning movements, quick-release plates, or certain lens shapes.

With the additional height of around 2.5 cm you regain exactly this clearance. The head can pan more freely, operation becomes more comfortable, and components such as rails or clamps are less likely to reach their mechanical limits. Especially for low-angle wildlife photography, birdwatching, or shooting from a car, this small elevation can have a surprisingly big impact.

3/8" thread, standardized connection solution for your tripod system

The Wimberley RB-100 Riser Block is equipped with a 3/8" thread, the connection size that is widely used in photography for tripod heads and tripod shoulders. This allows you to integrate the block into most professional setups without an adapter. You simply screw it between the tripod base or mount and the tripod head, and you’re done.

Because this 3/8" thread is such a common standard, you can use the RB-100 not only with the Wimberley Head, but also with many other compatible heads and platforms that use the same connection. This makes the Riser Block a flexible building block in your equipment that you can quickly move from one system to another as needed.

Height of approx. 2.5 cm, small elevation, noticeable effect

The height of the Wimberley RB-100 is approximately 2.5 cm. That may not sound like much at first, but it’s deliberately chosen: high enough to create freedom of movement, low enough not to shift the center of gravity of your setup unnecessarily upward. Especially with long focal lengths and low-angle shots, this is a very good compromise.

This additional distance between tripod base and head can prevent large lenses or quick-release clamps from hitting the platform. It also often makes it easier to access controls and locks that would otherwise be somewhat hidden or hard to reach. It’s a small adjustment with very practical benefits.

Diameter of 4.7 cm, compact yet stable

With a diameter of about 4.7 cm, the RB-100 Riser Block is compact enough to stay out of the way, yet offers a sufficiently wide contact surface for a stable fit. This size ensures that the block sits well in the hand, is easy to grip and screw on, and forms a solid base for the tripod head.

The proportions are chosen so that the Riser Block appears neither bulky nor delicate. Visually and functionally, it blends into typical tripod and gimbal setups without drawing attention—except for the fact that suddenly everything fits a bit better.

Weight of 86 g, easy to carry, robust in use

The Wimberley RB-100 weighs around 86 g. That’s light enough to keep it in your camera bag or backpack all the time without really having to think about extra weight. At the same time, this weight gives it a pleasantly solid feel in the hand, far from “cheap” or “hollow.”

For outdoor photographers who pay attention to every gram, this is a very relevant point: the Riser Block delivers a tangible benefit without unnecessarily weighing down your setup. You can simply plan it as a fixed part of your gear, especially if you often work with low platforms or special mounts.

Combine multiple RB-100 Riser Blocks, flexible height as needed

A practical detail: you can stack multiple Wimberley RB-100 Riser Blocks. If an elevation of about 2.5 cm is not enough, just add a second or third block until the height matches your setup. This way, the distance between tripod base and head can be adjusted step by step to your requirements.

This ability to combine them makes the RB-100 a modular tool. Instead of looking for a special, taller adapter, you simply use several identical blocks that can be cleanly screwed together. This is especially helpful if you work with different platforms and need to vary the height from time to time.

Areas of use: nature photography, wildlife, birdwatching, and more

The Wimberley RB-100 Riser Block plays to its strengths especially in nature and wildlife photography. When you’re working just above ground level with a Ground Pod or Low Pod, the additional height helps you move the Wimberley Head more freely and control large telephoto lenses safely. For birdwatching or shooting wildlife from a car, for example with the Kirk Window Mount, the block also provides more comfort and freedom of movement.

In combination with a NatureScapes.net Skimmer, the RB-100 also ensures that the tripod head does not sit too low and can pan and tilt smoothly. In short: wherever you use very low platforms with a gimbal head or similar heads, this spacer block can make handling significantly more comfortable.

Conclusion: a small accessory with great practical value

The Wimberley RB-100 Riser Block is a well thought-out, compact accessory for your tripod system. With its 3/8" thread, height of about 2.5 cm, diameter of 4.7 cm, and weight of 86 g, it integrates discreetly but effectively into professional photo setups. Especially in combination with the Wimberley Head, a Ground Pod, a Low Pod, the Kirk Window Mount, or a NatureScapes.net Skimmer, it provides more space, better operability, and an overall more balanced handling.

If you’re looking for a reliable, precisely manufactured accessory that meaningfully complements your existing gear, the Wimberley RB-100 Riser Block is a very well-designed option: small in size, big in practical benefit.