Leofoto SF-02N replacement foot with QD mount for SONY 200-600 mm f/5.6-6.3 FE G OSS

Leofoto SF-02N replacement foot with QD mount for SONY 200–600 mm f/5.6–6.3 FE G OSS

Sometimes it’s astonishing how much a seemingly small part can change the way you handle a large telephoto lens. The Leofoto SF-02N replacement foot was built precisely for that purpose: to make your Sony workhorse, the Sony 200–600mm f/5.6–6.3 G OSS FE [SEL200600G] (2019), noticeably more comfortable, safer, and more flexible to use in everyday life. No frills, but with well-thought-out, detailed design.

The SF-02N completely replaces the original tripod foot of this Sony lens. It sits directly on the tripod collar, is significantly flatter, lighter, and more ergonomically shaped than the standard foot, and thus gives you better balance on the tripod and when carrying. In short: less leverage, more control.

Arca-style compatible, integrated 38 mm dovetail profile

The foot has a cleanly integrated 38 mm wide dovetail clamping profile according to the Arca-style standard. You no longer need an additional quick-release plate; the replacement foot itself is your ARCA plate. This saves weight, height, and potential points of failure. According to the manufacturer, the SF-02N is fully ARCA compatible and fits a whole range of common quick-release clamps: ProMediaGear clamps, Wimberley clamps, Really Right Stuff screw clamps, Really Right Stuff lever clamps, Jobu Design clamps, Kirk clamps, FlexShooter screw cross clamp, as well as other Arca-style compatible (according to the manufacturer) 38 mm quick-release clamps.

In practice this means: you simply clamp the lens directly into your existing ARCA mount, without fiddling with additional plates. Especially if you frequently switch between tripod, gimbal, and monopod, this is a real gain in convenience.

With QD strap anchor mount, quick carry option included

The SF-02N has an integrated QD strap mount, i.e. a QD-compatible socket for suitable strap systems. This allows you to secure your Sony 200–600 mm f/5.6–6.3 FE G OSS directly to the lens foot instead of letting the weight hang from the camera mount. This is not only more comfortable, but also gentler on the equipment.

To use this QD strap mount, you need a strap with suitable QD strap anchors. You can find more information here: Strap with QD strap anchors. If you are on the move a lot—wildlife, sports, events—you will very likely no longer want to be without the option of quickly docking and undocking the set.

Developed specifically for this lens, a precise fit instead of a compromise

The Leofoto SF-02N is not just some universal part, but is designed specifically for this lens: the Sony 200–600mm f/5.6–6.3 G OSS FE [SEL200600G]. The contour of the foot follows the shape of the tripod collar, and the contact surface is precisely matched so that the lens sits securely and without play. No improvisation, no wobble, no DIY solution.

Due to the lower height compared to the original foot, the center of gravity of your setup sits closer to the tripod shoulder or gimbal. This improves stability and reduces vibrations, which is particularly noticeable at 600 mm focal length and longer exposure times. We would say: it simply feels “smoother” when you pan or track.

Robust 6061-T6 aluminum, black anodized for high durability

The SF-02N is made from 6061-T6 aluminum, a proven, high-strength aerospace aluminum. The material offers a very good ratio of strength to weight. At only 109 g, the replacement foot remains pleasantly light without giving way in heavy setups.

The surface is black anodized, which not only provides a discreet, low-reflection look, but also protects the foot against scratches and corrosion. In rough outdoor use—dust, moisture, the occasional branch in the way—the function is maintained, even if one or two signs of use appear over time. Which is normal and often even looks quite likeable.

Thoughtful dimensions for better handling

With a length of 12.6 cm, a width of 3.8 cm, and a height of 3.3 cm, the SF-02N offers sufficient contact area in the quick-release clamp and at the same time a comfortable gripping zone when you carry the lens by the foot. It has a lower profile than the original foot, which benefits you when transporting it in a backpack or bag, because the overall package becomes a bit more compact.

The proportions are chosen so that you can still get a good grip even when wearing gloves, without the foot feeling bulky. Especially during longer outdoor sessions, this mix of compactness and handling comfort becomes noticeable.

Safety stop screws to prevent sliding out

On the underside of the Leofoto SF-02N there are 2 safety stop screws. These safety stop screws prevent accidental sliding out of the quick-release clamp if the clamp is not fully closed once or loosens slightly in the heat of the moment. A small detail that can prevent a lot of trouble and damage in an emergency.

Especially with heavy telephoto combinations, this additional protection makes sense, because the load cannot silently creep forward or backward out of the clamp during panning or when carrying it over the shoulder.

Flexible mounting thanks to photo threads on the underside

On the underside of the SF-02N there are two classic photo threads: 1 x 3/8" UNC photo thread and 1 x 1/4" UNC photo thread. This means you can not only use the replacement foot in ARCA clamps, but, if necessary, also mount it directly on a tripod head, monopod, or another support with a screw connection.

These threaded holes significantly expand the range of applications. Whether it’s an older tripod head, a special slider, or an improvised mount in a hide: you remain flexible without having to search for adapters.

Stability and compatibility in professional environments

The Leofoto SF-02N is designed to integrate seamlessly into professional working environments. Thanks to the Arca-style compatible profile and the QD strap mount, it is equally suitable for studio work, wildlife photography, sports assignments, or travel. You can quickly switch the lens from a gimbal to a monopod, secure it on a strap in between, and later fix it again on the tripod head without constantly rebuilding hardware.

The combination of 6061-T6 aluminum, black anodized surface, precise clamping profile, and safety stop screws ensures that the foot continues to function reliably for years, even under intensive use. And yes, it may be “just” a replacement foot, but one that noticeably enhances your workflow with the Sony 200–600 mm f/5.6–6.3 FE G OSS.