Really Right Stuff TA-TLC clamp for RRS TVC tripods Series 2

Really Right Stuff TA-TLC clamp for RRS TVC Series 2 tripods, precise control directly on the tripod leg

Sometimes there’s no solid mounting point exactly where you need it. That’s where the Really Right Stuff TA-TLC clamp for RRS TVC Series 2 tripods comes into play. This tripod leg clamp is attached to the top leg segment of your RRS TVC tripod and turns the tripod leg into a stable, twist-proof accessory platform for your photo and video gear.

You get a single, precisely fitting clamp that is specifically matched to the RRS TVC Series 2 and integrates seamlessly into the system. No wobble, no makeshift half-baked solutions, but a clean, technically well thought-out extension of your tripod.

Flexible accessory holder with 2 x 1/4 inch UNC threads for photo and video accessories

The TA-TLC clamp offers you two standardized 1/4 inch UNC threads spaced 30 millimeters apart. These two mounting points are ideal when you want to attach accessories such as an RRS B2 LR quick release clamp, small video heads, magic arms, monitors, microphones, or an additional receiver. Thanks to the defined spacing, you can position accessories precisely without everything getting in each other’s way.

The threads are designed so that accessories can be mounted in a twist-proof manner. This is especially practical when you’re working with heavier components or frequently change positions and still need repeatable alignment.

Anti-rotation slot for ball head and quick release clamp

A key detail is the integrated anti-rotation slot. This slot allows you to mount a ball head or a quick release clamp such as the RRS B2 LR directly on the tripod leg without the unit unintentionally twisting. Especially with side-mounted setups, for example when you run a second camera in parallel or mount a monitor at eye level on the leg, this anti-rotation feature gives you significantly more confidence in your rig.

This way you can use your RRS TVC Series 2 tripod not only as a pure camera support, but as a modular workstation where you can arrange multiple components in a structured and secure way.

Made in the USA, precise manufacturing and high-quality materials

The Really Right Stuff TA-TLC clamp is manufactured in the USA and follows the typical RRS standards for precision fit and stability. You notice this immediately when you hold the clamp in your hand. The edges are cleanly finished, the surfaces are high-quality anodized, and the clamping mechanism operates smoothly and with control. It almost seems unspectacular—in a positive sense—because everything just works.

We see this type of accessory as a long-term investment. The TA-TLC clamp is robust enough to easily withstand years of outdoor use, changing temperatures, and frequent repositioning on the tripod leg. Visually and technically, it fits perfectly with the RRS TVC Series 2 tripods and integrates into a professional setup without being obtrusive.

Compatible with RRS TVC Series 2, Series 3 and Series 4 tripods

Even though this version is specifically designed for the RRS TVC Series 2, there are matching versions of the tripod leg clamp for the RRS TVC Series 3 and Series 4 tripods. So if you use multiple RRS tripods, you can apply the same principle across different systems and standardize your workflow.

All versions follow the same concept: secure attachment to the upper tripod leg, two 1/4 inch UNC threads with 30 millimeters spacing, anti-rotation slot, and simple, quick installation without complicated special tools.

Single clamp for the top tripod leg, freely positionable

The TA-TLC is designed as a single clamp that is mounted specifically on the top segment of your TVC tripod leg. You can freely choose the position along the leg and thus find exactly the point where accessories sit ergonomically. Higher for monitors or control units, slightly lower for battery packs or wireless systems—depending on how you work.

The clamping mechanism is designed so that the clamp holds securely and can still be repositioned quickly when needed. This is especially helpful when you switch between different setups or use the tripod differently in the studio, on location, and outdoors.

Easy installation without complicated additional parts

Installation of the Really Right Stuff TA-TLC clamp for RRS TVC Series 2 tripods is intentionally straightforward. You place the clamp around the upper tripod leg segment, tighten the clamp, and can immediately attach accessories with 1/4 inch UNC threads. No complex tripod modification is required, no permanent alteration, and no special tool that you first have to search for.

Especially when things need to move quickly—for example when switching from indoor to outdoor shooting or when rapidly reconfiguring a set—this simple handling pays off. You gain additional mounting points without complicating your setup.

Available in three versions, matched to Series 2, 3 and 4

The RRS tripod leg clamp is available in three versions to fit TVC tripods of Series 2, 3 and 4. Each version is precisely matched to the respective leg diameter so that the clamp grips reliably and does not slip. This preserves the stability of the entire system.

For you this means: you simply choose the version that matches your tripod and can be sure that the internal dimensions are correct. No improvising with spacers, no wobbly stopgap solution, but a cleanly fitting clamp for the respective RRS TVC tripod.

Technical data of the TA-TLC clamp for RRS TVC Series 2

The Really Right Stuff TA-TLC clamp version for RRS TVC Series 2 tripods is compact, lightweight, and still very stable. The technical data at a glance:

• Length: 46 millimeters
• Width: 45 millimeters
• Weight: 24 grams
• Inner diameter: 32.6 millimeters

These dimensions ensure that the clamp sits close to the upper leg segment of the RRS TVC Series 2 without protruding or hindering transport of the tripod. You can fold and carry the tripod as usual, while the clamp simply remains mounted.

Technical data of the version for RRS TVC Series 3

For the RRS TVC Series 3, a slightly larger version of the tripod leg clamp is available. The technical specifications of this version:

• Length: 50 millimeters
• Width: 49 millimeters
• Weight: 27 grams
• Inner diameter: 36.7 millimeters

These dimensions are matched to the larger leg diameter of the TVC Series 3 and offer the same functionality as the Series 2 version: two 1/4 inch UNC threads with 30 millimeters spacing, secure fit on the upper tripod leg, and an integrated anti-rotation slot.

Technical data of the version for RRS TVC Series 4

For the largest tripod class, the RRS TVC Series 4, a correspondingly dimensioned clamp is available. The technical data of this version:

• Length: 53 millimeters
• Width: 54 millimeters
• Weight: 35 grams
• Inner diameter: 40.7 millimeters

The Series 4 version is built somewhat more massive in order to ensure reliable clamping even with heavier setups and extensive accessories. Functionally, the principle remains identical: additional mounting points on the tripod leg, stable threads, twist-proof mounting, and simple, practice-oriented handling.

Practical benefits for photographers and filmmakers, more than just a small clamp

In practice, the Really Right Stuff TA-TLC clamp for RRS TVC Series 2 tripods opens up many possibilities: you can mount a second camera on the side of the leg, bring a monitor to a comfortable viewing height, neatly organize audio recorders and wireless systems on the tripod, or use a B2 LR quick release clamp as an additional platform.

We see the clamp as a small but very effective detail in a professional setup. It helps you bring order to your equipment, shorten cable runs, and place accessories exactly where they make the most sense. And that is often what makes the difference in everyday work between an improvised rig and a well thought-out, reliable system.