Leofoto CF-01 replacement foot with QD mount for Canon lenses

Leofoto CF-01 replacement foot for Canon, precisely built for long telephoto lenses

Sometimes it’s surprising how much stability you gain in a setup when just one component really fits. The Leofoto CF-01 replacement foot for Canon telephoto lenses falls exactly into this category: compact, stable, unobtrusive and yet noticeably high-quality. You simply replace the original lens foot and get a clearly more sophisticated base for your tripod, your strap, and your overall handling.

Made from robust 6061-T6 aluminum, black anodized for a hard-wearing surface, the CF-01 weighs in at only about 84 g, which is remarkably light. With a length of around 9.9 cm, a width of 3.8 cm and a height of 3.1 cm, it fits your Canon telephoto lens in a pleasantly compact way without appearing bulky. More like: screw it on, forget it, use it.

specifically developed for the following lenses

The Leofoto CF-01 is not just some universal part, but is specifically designed for certain Canon EF lenses. It replaces the original lens foot of the following models:

• Canon EF 200-400mm f/4L IS USM Extender 1.4x
• Canon EF 300mm f/2.8L IS II USM
• Canon EF 400mm f/4 DO IS II USM
• Canon EF 500mm f/4L IS II USM

These lenses particularly benefit from a stable, well-balanced tripod connection. The CF-01 provides a secure connection that really makes a difference in nature, sports, or wildlife photography, when you’re working with long focal lengths and every tiny vibration becomes immediately visible. Thanks to its precise fit, the lens sits firmly in place, which makes carrying, repositioning, and aligning noticeably more comfortable.

with QD strap socket for flexible carrying options

A small detail with a big impact: the Leofoto CF-01 features an integrated QD strap socket. This allows you to quickly clip in and release a suitable carrying strap with QD strap anchors without having to laboriously thread straps through eyelets every time. Especially with heavy telephoto lenses, this is a real gain in comfort, because you can safely carry the setup on the strap and still switch to the tripod quickly.

To use the QD strap socket, you need a strap with matching QD strap anchors. You can find more information here: Strap with QD strap anchors.

Thanks to QD compatibility, you can build your setup in a very modular way: quickly detach it from the tripod, secure camera and lens on the strap, then back onto the quick-release clamp. No fiddling, no loose screws. Just click it in and keep working.

Arca-style compatible for seamless integration into your tripod system

The CF-01 has an integrated 38 mm dovetail clamping profile that is Arca-style compatible. This means you no longer need an additional quick-release plate under the lens foot, as the foot itself can be inserted directly into suitable clamps. This saves height, weight, and reduces potential points of failure.

According to the manufacturer, the profile fits a wide range of common quick-release clamps, including:

• ProMediaGear clamps
• Wimberley clamps
• Arca-style compatible 38 mm quick-release clamps
• Really Right Stuff screw clamps
• Really Right Stuff lever clamps
• Jobu Design clamps
• Kirk clamps
• FlexShooter screw cross clamp

If you already use an ARCA-based tripod system, the Leofoto CF-01 integrates almost seamlessly. You place the lens in the clamp, tighten it, and you’re ready to shoot. You can find more information on ARCA compatibility here: ARCA compatible systems.

Safety stop screws for extra security in everyday use

There are 2 safety stop screws installed at the bottom end of the replacement foot. These small, often underestimated components ensure that the foot cannot accidentally slide out of the quick-release clamp if you haven’t opened the clamp fully or if you shift the lens a bit too far to the side. Especially with heavy telephoto lenses, this extra protection is very reassuring.

This way, your lens remains guided in the clamp even when you slide it a bit forward or backward to adjust the center of gravity. It’s a safety net that you ideally never need, but greatly appreciate when things get a bit hectic, for example with fast-changing subjects or uneven ground.

High-quality workmanship and practice-oriented design

The Leofoto CF-01 is made from 6061-T6 aluminum, a material frequently used in aviation and professional mechanical engineering. The black anodized surface protects against corrosion and wear and at the same time provides a discreet, low-reflection look that does not attract unnecessary attention during wildlife or sports use.

The compact design with 9.9 cm length, 3.8 cm width, and 3.1 cm height is chosen so that you can still carry the lens comfortably without getting caught on a bulky foot. At the same time, the shape offers enough contact area to hold the lens securely in your hand when you take it off the tripod or move it around in the field. There is a noticeable difference between a foot that just somehow fits and one that is truly thoughtfully engineered.

Stable base for Canon telephoto lenses in professional use

Whether you’re tracking birds in flight, shooting fast sports, or simply pushing long focal lengths for maximum sharpness, a solid tripod connection is crucial. The Leofoto CF-01 replacement foot provides a stable, ARCA compatible base that is perfectly matched to selected Canon EF telephoto lenses and gives you more confidence in your equipment in everyday use.

With the combination of QD strap socket, Arca-style compatible dovetail profile, low weight, and the 2 safety stop screws, you get a lens foot that convinces both in terms of safety and operating comfort. It’s not a spectacular accessory, but one you won’t want to be without after a short time, because everything just runs a bit more smoothly.