What does “Arca-Swiss compatible” actually mean?
…unfortunately not very much.
In this article we will successively test and publish the compatibility of quick-change components from different manufacturers.
Below you'll find a list of which 38 mm dovetail systems work together and in which ways, and which ones don't. This requires two perspectives:
- Which coupling from one manufacturer clamps which plates or angles from other manufacturers.
- Which plate profiles fit which couplings from other manufacturers.
We will provide a corresponding date, as manufacturers can change the specifications of their couplings or plate profiles in the meantime. Tested couplings, angles, or plates are sometimes examples of other similar quick-change components from the same manufacturer.
Couplings (quick-release base):
Really Right Stuff B2-LR-II 60mm Quick Release Clamp with Lever (R-Mount)
representative of all current Really Right Stuff clamps except B2-FABN MICRO
- Augenblicke-eingefangen plates and lens feet (tested on 15.02.2024)
- Really Right Stuff plates and Really Right Stuff brackets (tested on 22.03.2016)
- Kirk plates and Kirk brackets (tested on 22.03.2016)
- Wimberley plates (tested on 22.03.2016)
- Pro Media Gear plates and Pro Media Gear brackets (tested on 22.03.2016)
- Berlebach 38 mm profiles (tested on 22.03.2016)
- Peak Design Pro 38 mm profiles (tested on 26.03.2018)
- Fittest L-bracket for Sony RX-100 II (customer feedback from 13.12.2019)
- Rogeti TS-E Frame 3 (tripod collar for Canon TS-E lenses 17mm and 24mm) (customer feedback from 13.12.2019)
- Benro 38 mm clamping profiles (tested with Benro PL-85 quick release plate on 04.03.2021)
- Cambo plates QR-7, QR-8 (customer feedback from 13.12.2019)
The plates without safety screws fit perfectly, but the M3 safety screws protrude too far, as they are not sunk as deeply as with RRS or Kirk. In the RRS clamps, the plates then rest on the safety screws, as the cutouts in the clamps are not deep enough. So either use the plates without safety screws or with flatter screws (e.g., M3 slotted screws with flat head instead of the M3 hex screws).
- Gitzo D-profile plates, the plates slip when the clamp is fully closed (tested on 22.03.2016)
- Novoflex clamping profiles, the plates slip when the clamp is fully closed (tested on 22.03.2016)
- Manfrotto Q6 clamping profiles, the plates slip when the clamp is fully closed (tested on 22.03.2016)
- Sirui plates and brackets, the profiles might slip when the clamp is fully closed (tested on 22.03.2016)
not in stock, the item will be ordered for you
not in stock, the item will be ordered for you
not in stock, the item will be ordered for you
Really Right Stuff PC-LR-40 compact panorama clamp with quick release lever
The clamp seems to be less tolerant than other RRS lever clamps; clamping profiles that are slightly wider or taller than those from RRS cannot be clamped (the clamp will not close). Very narrow profiles, like those from Novoflex, have not yet been tested by us.
Depending on the deviation in profile width of Kirk plates, slightly narrower profiles can be clamped well, slightly wider profiles prevent the lever clamp from closing.
- Really Right Stuff plates and Really Right Stuff brackets (tested on 18.10.21)
- Wimberley plates (tested on 18.10.21)
- Kirk plates and brackets (tested on 18.10.2021)
Really Right Stuff B2-FABN-Micro: Mini Quick Release Clamp
Extremely compact clamp with 2 x 1/4″ UNC thread mount and Magpul QR mount, ideal for use on camera straps.
- Augenblicke-eingefangen lens plates and replacement feet (tested on 18.02.2025)
- Really Right Stuff plates and Really Right Stuff brackets (tested on 13.09.2016)
- Kirk plates and Kirk brackets (tested on 13.09.2016)
- Wimberley plates (tested on 13.09.2016)
- Pro Media Gear plates and Pro Media Gear brackets (tested on 13.09.2016)
- Berlebach 38 mm profiles (tested on 13.09.2016)
- Gitzo D-profile plates (tested on 13.09.2016)
- Novoflex clamping profiles (tested on 13.09.2016)
- Manfrotto Q6 clamping profiles (tested on 13.09.2016)
- Sirui plates and brackets (tested on 13.09.2016)
- Jobu Design profiles (tested on 13.09.2016)
- Burzynski profiles (tested on 13.09.2016)
- Benro profiles (tested on 13.09.2016)
- Photoseiki profiles (tested on 13.09.2016)
- Peak Design Pro 38 mm profiles (tested on 26.03.2018)
Wimberley Quick Release C-12 (Universal Quick Release Clamp)
Representative of all current Wimberley clamps. The Wimberley C-12 is one of our most universal clamps, as it can be installed on a wide variety of ball heads and accommodates a multitude of different clamping profiles.
- Augenblicke-eingefangen lens plates and replacement feet (tested on 18.02.2025)
- Really Right Stuff plates and Really Right Stuff brackets (tested on 22.03.2016)
- Kirk plates and Kirk brackets (tested on 22.03.2016)
- Wimberley plates (tested on 22.03.2016)
- Pro Media Gear plates and Pro Media Gear brackets (tested on 22.03.2016)
- Gitzo D-profile plates (tested on 22.03.2016)
- Novoflex clamping profiles (tested on 22.03.2016)
- Manfrotto Q6 clamping profiles (tested on 22.03.2016)
- Sirui plates and brackets (tested on 22.03.2016)
- Benro profiles (tested on 22.03.2016)
- Berlebach 38 mm profiles (tested on 22.03.2016)
- Jobu Design profiles (tested on 22.03.2016)
- Burzynski profiles (tested on 22.03.2016)
- Peak Design Pro 38 mm profiles (tested on 26.03.2018)
Manfrotto TOP LOCK Q6 Coupling
- Manfrotto Q6 clamping profiles (tested on 22.03.2016)
- Gitzo D-profile plates (tested on 22.03.2016)
- Berlebach 38 mm profiles (tested on 22.03.2016)
- Really Right Stuff plates and Really Right Stuff brackets (tested on 18.09.2017)
- Wimberley plates (tested on 18.09.2017)
- Kirk plates and Kirk brackets (tested on 22.03.2016)
- Jobu Design profiles, clamping not secure enough (tested on 22.03.2016)
Gitzo GS5760D Coupling
- Gitzo D-profile plates (tested on 22.03.2016)
- Augenblicke-eingefangen lens plates and replacement feet (tested on 18.02.2025)
- Manfrotto Q6 clamping profiles (tested on 22.03.2016)
- Really Right Stuff plates and Really Right Stuff brackets (tested on 22.03.2016)
- Wimberley plates (tested on 22.03.2016)
- Kirk plates and Kirk brackets (tested on 22.03.2016)
- Pro Media Gear plates and Pro Media Gear brackets (tested on 22.03.2016)
- Jobu Design profiles (tested on 22.03.2016)
- Berlebach 38 mm profiles (tested on 22.03.2016)
Gitzo QD Screw Couplings
…These couplings are currently standard on the following Gitzo ball heads: GH1382TQD, GH1382QD, GH3382QD
WARNING: In many cases, the safety stop screw of the Gitzo coupling must be removed for flawless use with third-party profiles (simply unscrew with a suitable hex key).
- Gitzo D-profile plates (tested on 22.03.2016)
- Augenblicke-eingefangen lens plates and replacement feet (tested on 18.02.2025)
- Manfrotto Q6 clamping profiles (tested on 22.03.2016)
- Really Right Stuff plates and Really Right Stuff brackets (tested on 22.03.2016)
- Wimberley plates (tested on 22.03.2016)
- Kirk plates and Kirk brackets (tested on 22.03.2016)
- Pro Media Gear plates and Pro Media Gear brackets (tested on 22.03.2016)
- Jobu Design profiles (tested on 22.03.2016)
- Berlebach 38 mm profiles (tested on 22.03.2016)
Novoflex Q=BASE Quick Coupling
WARNING: In many cases, the safety stop screws must be removed for proper use with third-party profiles (e.g., Kirk, ReallyRightStuff) from the camera plate or bracket (simply unscrew with a suitable hex wrench), as the coupling does not have a recess for accommodating the stop screws.
- Gitzo D-profile plates (tested on 22.03.2016)
- Augenblicke-eingefangen lens plates and replacement feet (tested on 18.02.2025)
- Manfrotto Q6 clamping profiles (tested on 22.03.2016)
- Really Right Stuff plates and Really Right Stuff brackets (tested on 22.03.2016)
- Wimberley plates (tested on 22.03.2016)
- Kirk plates and Kirk brackets (tested on 22.03.2016)
- Pro Media Gear plates and Pro Media Gear brackets (tested on 21.07.2021)
- Jobu Design profiles (tested on 22.03.2016)
- Berlebach 38 mm profiles (tested on 22.03.2016)
Novoflex Q=BASE II Quick Release Coupling
WARNING: In many cases, the safety stop screws must be removed for proper use with third-party profiles (e.g., Kirk, ReallyRightStuff) from the camera plate or bracket (simply unscrew with a suitable hex wrench), as the coupling does not have a recess for accommodating the stop screws.
- Augenblicke-eingefangen lens plates and replacement feet (tested on 18.02.2025)
- Really Right Stuff plates and Really Right Stuff brackets (tested on 24.09.2019)
- Wimberley plates (tested on 24.09.2019)
- Kirk plates and Kirk brackets (tested on 24.09.2019)
- Pro Media Gear plates and Pro Media Gear brackets (tested on 21.07.2021)
Novoflex Q=MOUNT Quick Release Coupling
WARNING: In many cases, the safety stop screws must be removed for proper use with third-party profiles (e.g., Kirk, ReallyRightStuff) from the camera plate or bracket (simply unscrew with a suitable hex wrench), as the coupling does not have a recess for accommodating the stop screws.
- Augenblicke-eingefangen lens plates and replacement feet (tested on 18.02.2025)
- Gitzo D-profile plates (tested on 23.03.2016)
- Manfrotto Q6 clamping profiles (tested on 23.03.2016)
- Really Right Stuff plates and Really Right Stuff brackets (tested on 23.03.2016)
- Wimberley plates (tested on 23.03.2016)
- Kirk plates and Kirk brackets (tested on 23.03.2016)
- Pro Media Gear plates and Pro Media Gear brackets (tested on 23.03.2016)
- Jobu Design profiles (tested on 23.03.2016)
- Berlebach 38 mm profiles (tested on 23.03.2016)
FLM SRB 40 Screw Coupling
Representative for all current FLM couplings with screw closure
- Augenblicke-eingefangen lens plates and replacement feet (tested on 18.02.2025)
- Gitzo D-profile plates (tested on 23.03.2016)
- Manfrotto Q6 clamping profiles (tested on 23.03.2016)
- Really Right Stuff plates and Really Right Stuff brackets (tested on 23.03.2016)
- Wimberley plates (tested on 23.03.2016)
- Kirk plates and Kirk brackets (tested on 23.03.2016)
- Pro Media Gear plates and Pro Media Gear brackets (tested on 23.03.2016)
- Jobu Design profiles (tested on 23.03.2016)
- Berlebach 38 mm profiles (tested on 23.03.2016)
- Sirui plates and brackets (tested on 23.03.2016)
FLM QRB 40 II
Representative for all current FLM QRB couplings with lever closure
- Gitzo D-profile plates (tested on 23.03.2016)
- Manfrotto Q6 clamping profiles (tested on 23.03.2016)
- Berlebach 38 mm profiles (tested on 23.03.2016)
- Berlebach 38 mm profiles (tested on 23.03.2016)
- Kirk plates and Kirk brackets (tested on 23.03.2016)
- Jobu Design profiles (tested on 23.03.2016)
- Really Right Stuff plates and Really Right Stuff brackets (tested on 23.03.2016)
- Wimberley plates (tested on 23.03.2016)
- Pro Media Gear plates and Pro Media Gear brackets (tested on 23.03.2016)
- Sirui plates and brackets
The Sirui profile is too shallow, causing the coupling to jam when or after locking, and it can only be opened again with force (tested on 23.03.2016)
Kirk Quick Release Clamp QRC-1 & Kirk Quick Release Clamp Kirk QRC-1 QD
- Really Right Stuff plates and Really Right Stuff brackets (tested on 23.03.2016)
- Augenblicke-eingefangen lens plates and replacement feet (tested on 18.02.2025)
- Kirk plates and Kirk brackets (tested on 23.03.2016)
- Wimberley plates (tested on 23.03.2016)
- Pro Media Gear plates and Pro Media Gear brackets (tested on 23.03.2016)
- Berlebach 38 mm profiles (tested on 23.03.2016)
- Jobu Design profiles (tested on 23.03.2016)
- Peak Design Pro 38 mm profiles (tested on 26.03.2018)
- Sirui plates and brackets (tested on 23.03.2016)
some fit, some slip through, no system recognized, possibly slight manufacturing tolerances in Sirui
- Manfrotto Q6 clamping profiles (tested on 23.03.2016)
- Novoflex clamping profiles (tested on 23.03.2016)
Profiles of the Slim series do not fit at all, all other profiles slip through - Gitzo D-profile plates (tested on 23.03.2016)
Kirk Quick Release Clamp QRC-2, Kirk Quick Release Clamp QRC-2.5, Kirk Quick Release Clamp QRC-3, Kirk Quick Release Clamp QRC-4, Kirk Quick Release Clamp QRC-1.8, Kirk Quick Release Clamp QRC-2.6, Kirk Quick Release Clamp QRC-3.18, Kirk Quick Release Clamp QRC-4.2, Kirk TQR-3S & Kirk TQR-2L
Representative for all current Kirk screw clamps except Kirk QRC-1 & QRC-1 QD
- Really Right Stuff plates and Really Right Stuff brackets (tested on 23.03.2016)
- Augenblicke-eingefangen lens plates and replacement feet (tested on 18.02.2025)
- Kirk plates and Kirk brackets (tested on 23.03.2016)
- Wimberley plates (tested on 23.03.2016)
- Pro Media Gear plates and Pro Media Gear brackets (tested on 23.03.2016)
- Berlebach 38 mm profiles (tested on 23.03.2016)
- Jobu Design profiles (tested on 23.03.2016)
- Peak Design Pro 38 mm profiles (tested on 26.03.2018)
- Gitzo D-profile plates (tested on 23.03.2016)
- Novoflex clamping profiles (tested on 23.03.2016)
- Manfrotto Q6 clamping profiles (tested on 23.03.2016)
- Sirui plates and brackets (tested on 23.03.2016)
- Benro profiles (tested on 23.03.2016)
- Burzynski profiles (tested on 23.03.2016)
Berlebach Quick Release 110
Representative for all current Berlebach screw clamps
- Really Right Stuff plates and Really Right Stuff brackets (tested on 23.03.2016)
- Augenblicke-eingefangen lens plates and replacement feet (tested on 18.02.2025)
- Kirk plates and Kirk brackets (tested on 23.03.2016)
- Wimberley plates (tested on 23.03.2016)
- Pro Media Gear plates and Pro Media Gear brackets (tested on 23.03.2016)
- Berlebach 38 mm profiles (tested on 23.03.2016)
- Jobu Design profiles (tested on 23.03.2016)
- Gitzo D-profile plates (tested on 23.03.2016)
- Novoflex clamping profiles (tested on 23.03.2016)
- Manfrotto Q6 clamping profiles (tested on 23.03.2016)
- Sirui plates and brackets (tested on 23.03.2016)
- Benro profiles (tested on 23.03.2016)
- Burzynski profiles (tested on 23.03.2016)
Jobu QRR-XS125 extra small quick release clamp with 1/4″ UNC internal thread & Jobu QRR-125 quick release clamp, 2″
Representative for all current screw clamps from the company Jobu Design
- Really Right Stuff plates and Really Right Stuff brackets (tested on 23.03.2016)
- Augenblicke-eingefangen lens plates and replacement feet (tested on 18.02.2025)
- Kirk plates and Kirk brackets (tested on 23.03.2016)
- Wimberley plates (tested on 23.03.2016)
- Pro Media Gear plates and Pro Media Gear brackets (tested on 23.03.2016)
- Berlebach 38 mm profiles (tested on 23.03.2016)
- Jobu Design profiles (tested on 23.03.2016)
- Gitzo D-profile plates (tested on 23.03.2016)
- Novoflex clamping profiles (tested on 23.03.2016)
- Manfrotto Q6 clamping profiles (tested on 23.03.2016)
- Sirui plates and brackets (tested on 23.03.2016)
- Benro profiles (tested on 23.03.2016)
- Burzynski profiles (tested on 23.03.2016)
Sirui MP-20 Quick Release Clamp
Representative for all current screw clamps from the company Jobu Design
- Augenblicke-eingefangen lens plates and replacement feet (tested on 18.02.2025)
- Really Right Stuff plates and Really Right Stuff brackets (tested on 23.03.2016)
- Kirk plates and Kirk brackets (tested on 23.03.2016)
- Wimberley plates (tested on 23.03.2016)
- Pro Media Gear plates and Pro Media Gear brackets (tested on 23.03.2016)
- Gitzo D-profile plates (tested on 23.03.2016)
- Novoflex clamping profiles (tested on 23.03.2016)
- Manfrotto Q6 clamping profiles (tested on 23.03.2016)
- Sirui plates and brackets (tested on 23.03.2016)
- Benro profiles (tested on 23.03.2016)
- Berlebach 38 mm profiles (tested on 23.03.2016)
- Jobu Design profiles (tested on 23.03.2016)
- Burzynski profiles (tested on 23.03.2016)
ARCA-SWISS QUICK SET DEVICE CLASSIC quick release clamp with screw closure
- Augenblicke-eingefangen lens plates and replacement feet (tested on 18.02.2025)
- Really Right Stuff plates and Really Right Stuff brackets (tested on 29.09.2017)
- Kirk plates and Kirk brackets (tested on 29.09.2017)
- Wimberley plates (tested on 29.09.2017)
- Pro Media Gear plates and Pro Media Gear brackets (tested on 29.09.2017)
ARCA-SWISS QUICK SET DEVICE "FLIP-LOCK" quick release clamp with lever closure
The clamp is adjustable and can be adapted to the listed compatible profiles. The clamp plates can only be inserted from the side (not tilted from above).
When switching profiles, re-adjustment is almost always necessary (e.g., when first clamping a Kirk plate, then an RRS plate...).
- Augenblicke-eingefangen lens plates and replacement feet (tested on 18.02.2025)
- Really Right Stuff plates and Really Right Stuff brackets (tested on 29.09.2017)
- Kirk plates and Kirk brackets (tested on 29.09.2017)
- Wimberley plates (tested on 29.09.2017)
- Pro Media Gear plates and Pro Media Gear brackets (tested on 29.09.2017)
Gitzo Swing Clamp
of the Gitzo Fluid Gimbal Tripod Head GHFG1
WARNING: The safety screw must be removed when using clamping profiles from some manufacturers!
- Augenblicke-eingefangen lens plates and replacement feet (tested on 18.02.2025)
- Really Right Stuff plates (tested on 07.11.2017)
- Kirk plates (tested on 07.11.2017)
- Wimberley plates (tested on 07.11.2017)
- Pro Media Gear plates (tested on 07.11.2017)
- Gitzo D-profile plates (tested on 07.11.2017)
- Novoflex clamping profiles (tested on 07.11.2017)
- Manfrotto Q6 clamping profiles (tested on 07.11.2017)
- Sirui plates (tested on 07.11.2017)
- Benro profiles (tested on 07.11.2017)
- Berlebach 38 mm profiles (tested on 07.11.2017)
- Jobu Design profiles (tested on 07.11.2017)
- Burzynski profiles (tested on 07.11.2017)
- Photoseiki profiles (tested on 07.11.2017)
- UniqBall 38 mm profiles (tested on 07.11.2017)
- FlexLine 38 mm profiles (tested on 07.11.2017)
- FlexShooter 38 mm profiles (tested on 18.02.2025)
- FLM 38 mm profiles (tested on 07.11.2017)
- Rollei 38 mm profiles (tested on 07.11.2017)
- Peak Design Pro 38 mm profiles (tested on 07.11.2017)
- Quenox 38 mm clamping profiles (tested on 07.11.2017)
FlexShooter (formerly FlexLine) Cross Quick Release Clamp
for the FlexShooter ball heads FlexShooter Mini Arca, FlexShooter Pro, and FlexShooter Extreme
WARNING: the clamping profiles used should be at least 55mm long and preferably have safety stop screws on the underside of the plate!
- Augenblicke-eingefangen lens plates and replacement feet (tested on 18.02.2025)
- Really Right Stuff plates (tested on 15.11.2017)
- Kirk plates (tested on 15.11.2017)
- Wimberley plates (tested on 15.11.2017)
- Pro Media Gear plates (tested on 15.11.2017)
- Jobu Design profiles (tested on 15.11.2017)
- Photoseiki profiles (tested on 15.11.2017)
- UniqBall 38 mm profiles (tested on 15.11.2017)
- FlexShooter 38 mm profiles (tested on 15.11.2017)
- Novoflex clamping profiles (tested on 19.06.2019)
- Sirui plates (tested on 19.06.2019)
- Berlebach 38 mm profiles (tested on 19.06.2019)
some plates hold well, others slip even when the clamp is fully closed!
- Gitzo D-profile plates (tested on 15.11.2017)
- Manfrotto Q6 clamping profiles (tested on 15.11.2017)
FlexShooter (formerly FlexLine) Cross Quick Release Lever Clamp
for the ball head FlexShooterPro Lever with Lever Clamp
WARNING: The clamping profiles used should be at least 55 mm long and preferably have safety stop screws on the underside of the plate!
The clamp is adjustable and can be adapted to the listed compatible profiles. Adjustment is done via the knurled screw opposite the lever joint and can only be made with the clamp open. Accidental adjustment (assuming proper adjustment) with the clamp closed is not possible. The adjustment is completely tool-free!
- Augenblicke-eingefangen lens plates and replacement feet (tested on 18.02.2025)
- Really Right Stuff plates (tested on 24.03.2020)
- Kirk plates (tested on 24.03.2020)
- Wimberley plates (tested on 24.03.2020)
- Pro Media Gear plates (tested on 24.03.2020)
- Jobu Design profiles (tested on 24.03.2020)
- Photoseiki profiles (tested on 24.03.2020)
- UniqBall 38 mm profiles (tested on 24.03.2020)
- FlexShooter 38 mm profiles (tested on 24.03.2020)
- Berlebach 38 mm profiles (tested on 24.03.2020)
- Novoflex clamping profiles (tested on 24.03.2020)
- Sirui plates (tested on 24.03.2020)
- Gitzo D-profile plates (tested on 24.03.2020)
- Manfrotto Q6 clamping profiles (tested on 24.03.2020)
Leofoto DDC-50 + BPL-50 Dual Quick Release Coupling
- Augenblicke-eingefangen lens plates and replacement feet (tested on 18.02.2025)
- Really Right Stuff plates and Really Right Stuff angles (tested on 28.01.2020)
- Kirk plates and Kirk angles (tested on 28.01.2020)
- Wimberley plates (tested on 28.01.2020)
- JOBU Design 38 mm clamping profiles of various quick release plates (tested on 28.01.2020)
- Flexshooter 38 mm clamping profiles (tested on 28.01.2020)
- ProMediaGear 38 mm clamping profiles (tested on 28.01.2020)
- Novoflex 38 mm clamping profiles (tested on 28.01.2020)
- Berlebach 38 mm clamping profiles (tested on 28.01.2020)
- Sirui 38 mm clamping profiles (tested on 28.01.2020)
Cambo Screw Clamps QR-6
- Augenblicke-eingefangen lens plates and replacement feet (tested on 18.02.2025)
- Cambo Plates QR-7, QR-8, QR-XL (Customer feedback from 13.12.2019)
- Really Right Stuff plates and Really Right Stuff angles (Customer feedback from 13.12.2019)
- Kirk plates and Kirk angles (Customer feedback from 13.12.2019)
- JOBU Design 38 mm clamping profiles of various quick release plates (Customer feedback from 13.12.2019)
- Fittest L-bracket for Sony RX-100 II (Customer feedback from 13.12.2019)
- Rogeti TS-E Frame 3 (Tripod collar for Canon TS-E lenses 17mm and 24mm) (Customer feedback from 13.12.2019)
Acratech 1143 Quick Release Clamp with Bubble Level
Representative for all current Acratech screw clamps
- Augenblicke-eingefangen lens plates and replacement feet (tested on 18.02.2025)
- Really Right Stuff plates and Really Right Stuff angles (tested on 28.01.2020)
- Kirk plates and Kirk angles (tested on 28.01.2020)
- Wimberley plates (tested on 28.01.2020)
- JOBU Design 38 mm clamping profiles of various quick release plates (tested on 28.01.2020)
- Flexshooter 38 mm clamping profiles (tested on 28.01.2020)
- ProMediaGear 38 mm clamping profiles (tested on 28.01.2020)
- Novoflex 38 mm clamping profiles (tested on 28.01.2020)
- Berlebach 38 mm clamping profiles (tested on 28.01.2020)
- Sirui 38 mm clamping profiles (tested on 28.01.2020)
- Gitzo D-profile plates
- Manfrotto Q6 clamping profiles (tested on 22.03.2016)
- Peak Design Pro 38 mm profiles (tested on 22.03.2016)
Acratech 1144 Quick Release Clamp with Bubble Level
Representative for all current Acratech lever clamps
The clamps are adjustable without tools, but minor adjustments may be necessary when changing profiles.
- Augenblicke-eingefangen lens plates and replacement feet (tested on 18.02.2025)
- Really Right Stuff plates and Really Right Stuff angles (tested on 28.01.2020)
- Kirk plates and Kirk angles (tested on 28.01.2020)
- Wimberley plates (tested on 28.01.2020)
- JOBU Design 38 mm clamping profiles of various quick release plates (tested on 28.01.2020)
- Flexshooter 38 mm clamping profiles (tested on 28.01.2020)
- ProMediaGear 38 mm clamping profiles (tested on 28.01.2020)
- Novoflex 38 mm clamping profiles (tested on 28.01.2020)
- Berlebach 38 mm clamping profiles (tested on 28.01.2020)
- Sirui 38 mm clamping profiles (tested on 28.01.2020)
- Gitzo D-profile plates
- Manfrotto Q6 clamping profiles (tested on 22.03.2016)
- Peak Design Pro 38 mm profiles (tested on 22.03.2016)
How do I find the specific accessories for my camera?
To find the right accessories for your camera, please navigate through the category → Camera Accessories.
Here you can either immediately find your camera model or click on Camera L-Brackets or Camera Plates, depending on what you need. For example, if you are in the L-Brackets category, choose the camera manufacturer, such as Nikon, Sony, Canon, Olympus, and then select your camera model from the appearing selection (please make sure to choose the model with or without battery grip).
If you can't find your camera model, there is no specific accessory available for it. This sometimes happens, especially with older camera models, for which nothing is produced anymore. Alternatively, there is likely a universal plate or an L-bracket available for it.
How do I find the specific accessories for my lens?
Please navigate through the category → Lens Accessories.
Choose from the categories Lens Plates or Lens Replacement Feet, Lens Collars or Lens Protection, depending on what you need. For example, if you are in the Lens Plates category, choose the lens manufacturer, e.g., Nikon, Sony, Canon, Olympus, and then select your lens model from the appearing selection.
If you cannot find your lens model, there won't be specific accessories available for it – but there will surely be alternatives.
...we continuously update the content of this page for you.