Peak Design Capture Clip v3 incl. Standard Plate - (silver-colored)

Peak Design Capture Clip v3 silver – your camera right where you really need it

You know how it is: the camera dangles from the strap, bangs against your hip, constantly slips to the front, and at the crucial moment everything gets tangled. With the Peak Design Capture Clip v3 incl. Standard Plate in silver you get a solution that feels more like a clever tool than an accessory. You carry your camera securely and firmly, yet instantly ready to hand, without any fiddling around.

Camera clip for belts and straps, usable almost anywhere

The Capture Clip v3 is a compact camera clip for belts, backpack straps and shoulder straps that you can attach to almost any strap. Comfortably on your hip, across a backpack strap or even on a bag, depending on how you’re on the move.

It is suitable for straps and belts up to 64 mm wide and up to 15 mm thick. That means typical hiking backpacks, camera backpacks, hip belts, standard trouser and outdoor belts usually fit without any issues. No special strap needed, no extra system you first have to reconfigure.

Secure hold without slipping, even when things get rough

On the inside of the clip there is a ribbed plastic surface that creates friction and prevents the clip from sliding back and forth on the strap. Especially when you move a lot – hiking, city trips, cycling, maybe even via ferrata – your camera stays where you attached it.

We’d say: once you’ve tightened it properly, you’ll almost forget the clip is there. Until you need the camera.

Light, slim, robust, made entirely of aluminium

The Capture Clip v3 is made entirely of aluminium and in this model is anodised silver. That not only looks high-quality, it also feels that way. The design is narrower, flatter and lighter than previous versions, so the clip barely adds any bulk to the strap.

With a weight of only 70 g (clip only) it is pleasantly unobtrusive, yet impressively sturdy. The load capacity of up to 90 kg is of course far more than any normal camera weighs, but it clearly shows how solid and reliable the system is designed to be.

The compact dimensions of 20 x 83 x 40 mm ensure that the clip doesn’t get in the way – whether walking, sitting, or squeezing through narrow train doors. You can tell: this is made for real everyday use outdoors.

Compatible with many plates, flexible in existing setups

The Capture Clip v3 is designed to integrate well into existing setups. It fits current Peak Design plates, older Peak Design models and square 3 Legged Thing plates. So if you already use accessories in this area, you don’t have to start from scratch.

With the included Standard Plate you get a camera plate with a continuous Arca-style profile. This means you can clamp the camera directly into many Arca-style-compatible tripod heads without constantly changing plates. Camera out of the clip, onto the tripod, done – it becomes a very smooth process.

Suitable for DSLR, DSLM and mirrorless medium format cameras

The Capture Clip v3 is not picky about camera size. It is suitable for DSLR cameras, DSLM cameras and mirrorless medium format cameras, covering everything from a lightweight travel setup to serious professional gear.

Whether you’re roaming the city with a compact mirrorless camera or hiking in the mountains with a full-size full-frame DSLR, the clip is designed for this range. And yes, heavier combinations of camera and fast zoom lens are still well within the safe zone given the specified load capacity.

Fast camera access, no fiddly fasteners

The real highlight is the fast camera access. Your camera sits in a fixed position on the strap, you release it from the camera plate mount with one hand movement and can start shooting immediately.

So you don’t have to take off your backpack, open zippers, rummage through inner pockets. The camera is simply there. And precisely when the moment happens that you would otherwise easily miss.

At the same time, the reliable safety mechanism ensures that the camera stays in the clip until you really want to release it. The system is designed for quick access but also for safety.

Camera plate mount with safety mechanisms

The mount for the camera plate is designed to enclose the plate firmly and uses safety mechanisms that prevent it from accidentally falling out. You slide the plate into the clip, it locks into place, and only with deliberate pressure on the release mechanism can you remove the camera again.

Especially when you move a lot, bend down, climb, or stand between other people on the train, this gives you a good feeling. The camera sits firmly without wobbling or rattling.

Standard Plate with continuous Arca-style profile

The scope of delivery includes a Standard Plate camera plate with a continuous Arca-style profile. This plate is attached to your camera with a 1/4-inch camera screw and is therefore compatible with standard tripod threads.

Thanks to the Arca-style profile, you can place the camera directly into many common tripod heads without having to mount an additional plate. This saves time, reduces weight on the camera and makes your setup more streamlined overall. Especially if you frequently switch between “on the strap” and “on the tripod”, this is very convenient.

Material, dimensions and load capacity at a glance

So you have the technical data ready at a glance, here are the key points again in compact form:

• Material: Aluminium, anodised silver
• Load capacity: up to 90 kg
• Weight: 70 g (clip only)
• Dimensions: 20 x 83 x 40 mm
• Strap/belt compatibility: up to 64 mm wide, up to 15 mm thick

This combination of low weight, high load capacity and compact dimensions makes the Capture Clip v3 a very versatile companion, whether when travelling, in everyday life or on longer photo tours.

Scope of delivery – everything you need to get started

In the package of the Peak Design Capture Clip v3 incl. Standard Plate (silver) you’ll find everything you need for immediate use:

• 1 camera clip
• 1 clamping plate with 1/4-inch camera screw (Arca-style compatible)
• 1 hex key
• 2 hex screws to replace the standard thumb screws

With the included hex screws you can make the clip even flatter and more discreet if needed by replacing the thumb screws. This allows you to adapt the system even better to your personal style and your equipment.

Who the Capture Clip v3 is particularly interesting for

The Peak Design Capture Clip v3 in silver is ideal if you want to carry your camera quickly accessible, securely fixed and close to your body without constantly tugging at the shoulder strap. Whether you hike a lot, travel, shoot street photography or are simply fed up with swinging camera straps, this system takes a lot of everyday hassle off your shoulders.

We’d say: anyone who often leaves their camera at home because it’s “too bulky” might be quite surprised with this clip at how comfortable carrying a camera can actually be.