Kirk TQR-MPS round quick release plate (small) up to 57 mm

Round quick-release plate for smooth changes on the tripod head

Do you know that slight annoyance when you want to change the tripod head and it takes longer than expected again? With the Kirk TQR-MPS round quick-release plate (small) up to 57 mm, things are much more relaxed. You equip your tripod head at the base with a precise 38 mm dovetail quick-release profile and change heads or setups without having to fiddle around every time. Place it on, tighten it, done.

The round quick-release plate is deliberately kept compact, fits perfectly with tripod heads with a base diameter of up to 57 mm, and blends unobtrusively into your setup. Not a bulky block, but a small, robust base that simply works.

High-quality materials and precise manufacturing

The Kirk TQR-MPS quick-release plate uses 6061-T6 aluminum in combination with stainless steel. This aluminum is something like the long-time favorite for professional accessories in the photo industry because it is light, stable, and quite resistant in everyday use. The stainless steel components additionally ensure durability and reliable screw connections, even if you assemble and disassemble your equipment frequently.

The surface is satin silver anodized. This not only gives the plate a premium look, it also provides better protection against scratches and corrosion. Especially if you are outdoors a lot, in the rain, on the coast, or in the mountains, such an anodized layer pays off in the long term.

Technical data at a glance

So that you can immediately assess whether the round quick-release plate fits your setup, here are all the details, clearly and completely:

• Material: 6061-T6 aluminum and stainless steel
• Surface: satin silver anodized for a robust, discreet look
• Diameter: approx. 5.0 cm, ideal for compact tripod heads
• Height: approx. 1.1 cm, adds very little height and keeps the center of gravity low
• Weight: approx. 42 g, pleasantly light in the camera backpack
• Includes: 3/8" UNC mounting screw for direct installation on the tripod head
• Twist-resistant: designed to reliably prevent unwanted rotation
• With safety stop screws: additional safety so that your head does not accidentally slip out of the quick-release system
• Compatibility: suitable for all tripod heads with 3/8" UNC thread
• Recommendation: optimal for tripod heads with a base diameter of up to 57 mm

Made in the USA, solid photo gear without frills

The Kirk TQR-MPS quick-release plate is made in the USA, and you can tell in the best sense. The manufacturing quality is high, tolerances are tight, and nothing wobbles unnecessarily. We would say it feels more like a small precision engineering component than just any accessory part.

Clean workmanship is particularly noticeable with quick-release plates. When the profile is milled precisely, the tripod head slides smoothly into the clamp and then sits without play. This is not only pleasant in handling, but also important for a stable, reproducible alignment of your camera, whether you are shooting landscapes, architecture, or product photos.

Compatible with 3/8" UNC thread, simply screw on and get started

The plate comes with a matching 3/8" UNC mounting screw. You screw it directly to the base of your tripod head with a 3/8" UNC thread, without additional adapters. This makes installation straightforward and reduces potential sources of error. Once mounted, the round quick-release plate serves as a permanent interface to your quick-release system with a 38 mm dovetail profile.

Because the 3/8" UNC thread is virtually the standard for tripod heads in photography, the Kirk TQR-MPS can be integrated into many existing setups. In many cases, it makes little difference whether you use a classic three-legged tripod, a compact travel tripod head, or a robust video head, as long as the thread fits and the base diameter is within the recommended range up to 57 mm.

Twist protection and safety stop screws for more confidence in use

One detail that is often underestimated is the twist protection. The Kirk TQR-MPS round quick-release plate is designed to operate with twist resistance. This means it remains stable in position even with a tight clamp and does not tend to slowly rotate under lateral load. This is a real advantage, especially with longer focal lengths or when you have to readjust frequently.

In addition, safety stop screws are integrated. These small screws ensure that the tripod head cannot simply slip out of the clamp, even if the clamp is not fully opened or is unintentionally loosened. It’s a kind of silent bodyguard for your equipment. You hope you’ll never need it, but you’re glad it’s there.

Ideal for tripod heads up to 57 mm base diameter

The Kirk TQR-MPS quick-release plate small is specifically designed for tripod heads with a base diameter of up to 57 mm. In this range, it sits cleanly on the contact surface without protruding or looking too small. This ensures an even distribution of force and a stable connection between tripod and head.

If your tripod head falls within this size range, this round quick-release plate gives you a very well-balanced combination of proportion, weight, and stability. For compact yet high-quality setups, it’s a very practical solution.

Who the Kirk TQR-MPS quick-release plate is particularly worthwhile for

This round quick-release plate is especially interesting if you:

• use multiple tripod heads and want to switch quickly between them
• want to retrofit a reliable 38 mm dovetail quick-release profile on your head
• value high-quality materials such as 6061-T6 aluminum and stainless steel
• are looking for a compact, lightweight solution weighing only about 42 g
• prefer a plate that is twist-resistant and equipped with safety stop screws

We would say it is aimed at users who do not see their tripod system as disposable, but as a long-term tool that should function reliably, even when used regularly.

Conclusion on the Kirk TQR-MPS round quick-release plate (small)

All in all, the Kirk TQR-MPS round quick-release plate (small) up to 57 mm is a thoughtfully designed, compact accessory that can make your workflow on the tripod noticeably smoother. It combines a precise 38 mm dovetail quick-release profile with a lightweight, robust construction made of 6061-T6 aluminum and stainless steel, is satin silver anodized, and with its approximately 5.0 cm diameter and 1.1 cm height adds hardly any extra bulk to the system.

If you are looking for a reliable quick-release plate made in the USA that is compatible with a 3/8" UNC thread, operates with twist resistance, and offers additional security with safety stop screws, this model is a very good fit for a professional or ambitious photo setup. Simply mount it and, in everyday use, notice that changing tripod heads suddenly becomes less of an issue because it just works.